[LATEST RELEASED DUMPS] Braindump2go Guarantee Microsoft 70-411 100% Success By Using Latest Microsoft 70-411 Practice Exam Questions (211-225)

Braindump2go New Updated Microsoft 70-411 Dumps Free Download Now! 100% Pass Your 70-411 Exam One Time At Your First Try! Instant Download 70-411 Dumps Full Version From Braindump2go Now!

Vendor: Microsoft
Exam Code: 70-411
Exam Name: Administering Windows Server 2012 R2 Exam

116

QUESTION 211
Your network contains an Active Directory domain named contoso. com.
All domain controllers run either Windows Server 2008 or Windows Server 2008 R2.
You deploy a new domain controller named DC1 that runs Windows Server 2012 R2.
You log on to DC1 by using an account that is a member of the Domain Admins group.
You discover that you cannot create Password Settings objects (PSOs) by using Active Directory Administrative Center.
You need to ensure that you can create PSOs from Active Directory Administrative Center.
What should you do?

A.    Modify the membership of the Group Policy Creator Owners group.
B.    Transfer the PDC emulator operations master role to DC1.
C.    Upgrade all of the domain controllers that run Window Server 2008.
D.    Raise the functional level of the domain.

Answer: D
Explanation:
Fine-grained password policies allow you to specify multiple password policies within a single domain so that you can apply different restrictions for password and account lockout policies to different sets of users in a domain. To use a fine-grained password policy, your domain functional level must be at least Windows Server 2008. To enable fine-grained password policies, you first create a Password Settings Object (PSO).
You then configure the same settings that you configure for the password and account lockout policies.
You can create and apply PSOs in the Windows Server 2012 environment by using the Active Directory Administrative Center (ADAC) or Windows PowerShell.
Step 1: Create a PSO
Applies To: Windows Server 2008, Windows Server 2008 R2
http://technet.microsoft.com/en-us//library/cc754461%28v=ws.10%29.aspx

QUESTION 212
Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012 R2. The domain contains 200 Group Policy objects (GPOs) and 100 WMI filters. An administrator named Admin1 must be able to create new WMI filters and edit all of the existing WMI filters from the Group Policy Management Console (GPMC).
You need to delegate the required permissions to Admin1.
The solution must minimize the number of permissions assigned to Admin1.
What should you do?

A.    From Group Policy Management, assign Full control to Admin1 for the WMI Filters container.
B.    From Active Directory Users and Computers, add Admin1 to the Domain Admins group.
C.    From Group Policy Management, assign Creator Owner to Admin1 for the WMI Filters container.
D.    From Active Directory Users and Computers, add Admin1 to the WinRMRemoteWMIUsers__group.

Answer: A
Explanation:
Users with Full control permissions can create and control all WMI filters in the domain,
including WMI filters created by others.
Users with Creator owner permissions can create WMI filters, but can only control WMI filters that they create.
http://technet.microsoft.com/en-us/library/cc757429(v=ws.10).aspx

QUESTION 213
Hotspot Question
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Windows Server Update Services server role installed. All client computers are configured to download updates from Server1.
You have a Group Policy object (GPO) named GPO1 that is linked to an organizational unit (OU) named Sales_OU.
You need to ensure that all of the computers in Sales_OU are added to a Windows Server Update Services (WSUS) computer group named SalesComputers.
Which setting should you configure in the GPO?
To answer, select the appropriate setting in the answer area.

wps4B.tmp_thumb

Answer:

wps1745.tmp_thumb

QUESTION 214
Your network contains three Network Policy Server (NPS) servers named NPS1, NPS2, and NPS3. NPS1 is configured as a RADIUS proxy that forwards connection requests to a remote RADIUS server group named Group1.
You need to ensure that NPS2 receives connection requests.
NPS3 must only receive connection requests if NPS2 is unavailable.
How should you configure Group1?

A.    Change the Weight of NPS2 to 10.
B.    Change the Weight of NPS3 to 10.
C.    Change the Priority of NPS2 to 10.
D.    Change the Priority of NPS3 to 10.

Answer: D
Explanation:
Priority specifies the order of importance of the RADIUS server to the NPS proxy server. Priority level must be assigned a value that is an integer, such as 1, 2, or 3. The lower the number, the higher priority the NPS proxy gives to the RADIUS server. For example, if the RADIUS server is assigned the highest priority of 1, the NPS proxy sends connection requests to the RADIUS server first; if servers with priority 1 are not available, NPS then sends connection requests to RADIUS servers with priority 2, and so on. You can assign the same priority to multiple RADIUS servers, and then use the Weight setting to load balance between them.

QUESTION 215
Hotspot Question
Your network contains an Active Directory domain named contoso.com. The domain contains three servers named Server2, Server3, and Server4.
Server2 and Server4 host a Distributed File System (DFS) namespace named Namespace1.
You open the DFS Management console as shown in the exhibit. (Click the Exhibit button.)

wps3BD6.tmp_thumb

To answer, complete each statement according to the information presented in the exhibit.
Each correct selection is worth one point.

wps5994.tmp_thumb

Answer:

wps6E9B.tmp_thumb

QUESTION 216
Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012 R2.
You plan to use fine-grained password policies to customize the password policy settings of contoso.com.
You need to identify to which Active Directory object types you can directly apply the fine-grained password policies.
Which two object types should you identify?
(Each correct answer presents part of the solution. Choose two.)

A.    Domain local groups
B.    Computers
C.    Universal groups
D.    Global groups
E.    Users

Answer: DE
Explanation:
First off, your domain functional level must be at Windows Server 2008. Second, Fine-grained password policies ONLY apply to user objects, and global security groups. Linking them to universal or domain local groups is ineffective. I know what you’re thinking, what about OU’s? Nope, Fine-grained password policy cannot be applied to an organizational unit (OU) directly.
The third thing to keep in mind is, by default only members of the Domain Admins group can set fine-grained password policies. However, you can delegate this ability to other users if needed.
Fine-grained password policies apply only to user objects (or inetOrgPerson objects if they are used instead of user objects) and global security groups.
You can apply Password Settings objects (PSOs) to users or global security groups:
http://technet.microsoft.com/en-us/library/cc731589%28v=ws.10%29.aspx http://technet.microsoft.com/en-us/library/cc731589%28v=ws.10%29.aspx http://technet.microsoft.com/en-us/library/cc770848%28v=ws.10%29.aspx http://www.brandonlawson.com/active-directory/creating-fine-grained-password-policies/

QUESTION 217
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 that runs Windows Server 2012 R2. All client computers run Windows 8 Enterprise. DC1 contains a Group Policy object (GPO) named GPO1.
You need to update the PATH variable on all of the client computers.
Which Group Policy preference should you configure?

A.    Ini Files
B.    Services
C.    Environment
D.    Data Sources

Answer: C
Explanation:
Environment Variable preference items allow you to create, update, replace, and delete user and system environment variables or semicolon-delimited segments of the PATH variable. Before you create an Environment Variable preference item, you should review the behavior of each type of action possible with this extension.

QUESTION 218
Your network has a router named Router1 that provides access to the Internet.
You have a server named Server1 that runs Windows Server 2012 R2. Server1 to use Router1 as the default gateway. A new router named Router2 is added to the network. Router2 provides access to the Internet. The IP address of the internal interface on Router2 is 10.1.14.254.
You need to configure Server1 to use Router2 to connect to the Internet if Router1 fails.
What should you do on Server1?

A.    Add a route for 10.1.14.0/24 that uses 10.1.14.254 as the gateway and set the metric to 500.
B.    Add 10.1.14.254 as a gateway and set the metric to 500.
C.    Add a route for 10.1.14.0/24 that uses 10.1.14.254 as the gateway and set the metric to 1.
D.    Add 10.1.14.254 as a gateway and set the metric to 1.

Answer: B
Explanation:
To configure the Automatic Metric feature:
1. In Control Panel, double-click Network Connections.
2. Right-click a network interface, and then click Properties.
3. Click Internet Protocol (TCP/IP), and then click Properties.
4. On the General tab, click Advanced.
5. To specify a metric, on the IP Settings tab, click to clear the Automatic metric check box, and then enter the metric that you want in the Interface Metric field.
To manually add routes for IPv4
Open the Command Prompt window by clicking the Start button Picture of the Start button.
In the search box, type Command Prompt, and then, in the list of results, click Command Prompt.
At the command prompt, type route -p add [destination] [mask <netmask>] [gateway]
[metric <metric>] [if <interface>].

QUESTION 219
Your network contains and Active Directory domain named contoso.com. The domain contains a member server named Server1. All servers run Server 2012.
You need to collect the error events from all the servers on Server1. The solution ensure that when new servers are added to the domain, their error events are collected automatically on Server1.
Which two actions should you perform?
(Each correct answer presents part of the solution. Choose two.)

A.    On Server1, create a source computer initiated subscription.
B.    From a Group Policy object (GPO), configure the Configure forwarder resource usage settings.
C.    From a Group Policy object (GPO), configure the Configure target Subscription Manager settings
D.    On Server1, create a collector initiated subscription.

Answer: AC
Explanation:
A. Source-initiated subscriptions allow you to define a subscription on an event collector computer without defining the event source computers, and then multiple remote event source computers can be set up (using a group policy setting) to forward events to the event collector computer.
C. Enable the SubscriptionManager setting, and click the Show button to add a server address to the setting.
http://technet.microsoft.com/en-us/library/cc722010.aspx
http://msdn.microsoft.com/en-us/library/windows/desktop/bb870973(v=vs.85).aspx

QUESTION 220
Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012 R2. DirectAccess is deployed to the network. Remote users connect to the DirectAccess server by using a variety of network speeds. The remote users report that sometimes their connection is very slow.
You need to minimize Group Policy processing across all wireless wide area network (WWAN) connections.
Which Group Policy setting should you configure?

A.    Configure Group Policy slow link detection.
B.    Configure wireless policy processing.
C.    Change Group Policy processing to run asynchronously when a slow network connection is detected.
D.    Configure Direct Access connections as a fast network connection.

Answer: A

QUESTION 221
Hotspot Question
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2.
Server1 has the Windows Server Update Services server role installed.
You need to use the Group Policy object (GPO) to assign members to a computer group.
Which setting should you configure in the GPO?
To answer, select the appropriate setting in the answer area.

wps2ACC.tmp_thumb

Answer:

wps4926.tmp_thumb

Explanation:
Client-side targeting involves automatically assigning the computers by using either Group Policy or registry keys. Second, create the computer group in WSUS. Third, move the computers into groups by using whichever method you chose in the first step.
http://technet.microsoft.com/en-us/library/cc720433(v=ws.10).aspx

QUESTION 222
The contoso.com domain contains a a DNS server named Server1 that host a primary zone. Server2 contains a a secondary zone for the contoso.com doamin.
You need to configure how long Server2 queries Server1 to renew the zone.
What should you configure?

A.    Retry Interval
B.    Minimum TTL
C.    Refresh Interval
D.    Authority Record

Answer: C
Explanation:
A. The time, in seconds, a secondary server waits before retrying a failed zone transfer. Normally, this time is less than the refresh interval. The default value is 600 seconds (10 minutes).
B The default Time-To-Live (TTL) of the zone and the maximum interval for caching negative answers to name queries. The default value is 3,600 seconds (1 hour).
C. The time, in seconds, that a secondary DNS server waits before querying its source for the zone to attempt renewal of the zone. When the refresh interval expires, the secondary DNS server requests a copy of the current SOA record for the zone from its source, which answers this request. The secondary DNS server then compares the serial number of the source server’s current SOA record (as indicated in the response) with the serial number in its own local SOA record. If they are different, the secondary DNS server requests a zone transfer from the primary DNS server. The default for this field is 900 seconds (15 minutes).
D.
http://technet.microsoft.com/en-us/library/cc779148(v=ws.10).aspx

QUESTION 223
Hotspot Question
Your network contains an Active Directory domain named contoso.com. The domain contains three member servers named Server1, Server2, and Server3. All servers run Windows Server 2012 R2 and have the Windows Server Update Services (WSUS) server role installed.
Server1 and Server2 are configured as replica servers that use Server3 as an upstream server. You remove Server3 from the network.
You need to ensure that WSUS on Server2 retrieves updates from Server1.
The solution must ensure that Server1 and Server2 have the latest updates from Microsoft.
Which command should you run on each server?
To answer, select the appropriate command to run on each server in the answer area.

wps7297.tmp_thumb

Answer:

wps92F4.tmp_thumb

QUESTION 224
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 that runs Windows Server 2012 R2.
You mount an Active Directory snapshot on DC1.
You need to expose the snapshot as an LDAP server.
Which tool should you use?

A.    ADSI Edit
B.    Ntdsutil
C.    Dsamain
D.    Ldp

Answer: C
Explanation:

wpsBBB9.tmp_thumb

http://technet.microsoft.com/en-us/library/cc753609(v=ws.10).aspx

QUESTION 225
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. Server1 has a drive named E that is encrypted by using BitLocker Drive Encryption (BitLocker). A recovery key is stored on drive C. Drive E becomes locked. When you attempt to use the recovery key, you receive the following error message.

wpsD987.tmp_thumb[2]

You need to access the data stored on drive E. What should you run first?

A.    manage-bde -protectors -get e:
B.    manage-bde -unlock e: -recoverykey c:\
C.    disable-bitlocker -mountpoint e:
D.    unlock-bitlocker -mountpoint e: -recoverykeypath c:

Answer: A
Explanation:
Manage-bde is used to turn on or turn off BitLocker, specify unlock mechanisms, update recovery methods, and unlock BitLocker-protected data drives. This command-line tool can be used in place of the BitLocker Drive Encryption Control Panel item.
http://technet.microsoft.com/en-us/library/ff829849.aspx


Thanks For Trying Braindump2go Latest Microsoft 70-411 Dumps Questions! Braindump2go Exam DumpsADVANTAGES:

☆ 100% Pass Guaranteed Or Full Money Back!
☆ Instant Download Access After Payment!
☆ One Year Free Updation!
☆ Well Formated: PDF,VCE,Exam Software!
☆ Multi-Platform capabilities – Windows, Laptop, Mac, Android, iPhone, iPod, iPad.
☆ Professional, Quick,Patient IT Expert Team 24/7/365 Onlinen Help You!
☆ We served more than 35,000 customers all around the world in last 5 years with 98.99% PASS RATE!
☆ Guaranteed Secure Shopping! Your Transcations are protected by Braindump2go all the time!
☆ Pass any exams at the FIRST try!

120

http://www.braindump2go.com/70-411.html